LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Cooling System - 1.6L) >> Water Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the drain plug and drain the engine coolant.

    (Refer to Cooling System - "COOLANT ")

  2. Remove the drive belt.

    (Refer to Drive Belt System - "DRIVE BELT ")

  3. Remove the water pump pulley (A).
    G13480064Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the water pump (A) with gasket.
G13480065Courtesy of KIA MOTORS AMERICA, INC.