LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 385 (Brake System) >> Brake Switch >> Repair Procedures >> Inspection >> Inspect The Stop Lamp Circuit

Inspect The Stop Lamp Circuit

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Connect probe to each terminal wire and confirm oscilloscope waveform.

[Stop lamp switch input/output] 

G13481682Courtesy of KIA MOTORS AMERICA, INC.

[Oscilloscope waveform screen] 

G13481683Courtesy of KIA MOTORS AMERICA, INC.