LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 373 (Drive Belt System - 1.6L) >> Idler >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt.

    (Refer to Drive Belt System - "DRIVE BELT ")

  2. Remove the idler (A).

    Tightening torque: 

    42.2 - 53.9 N.m (4.3 - 5.5 kgf.m, 31.1 - 39.8 lb.ft)

    G13480252Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
  3. Install in the reverse order of removal.