LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Control System - 1.6L) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    NOTE:
    • Tighten the component with the specified torques.
    • If the component has been dropped, inspect if it is damaged before installation.
    • Apply the engine oil to the O-ring.
    • Insert the sensor in the installation hole and be careful not to damage.
scientia non olet · About LEMON Manuals