LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Body Side Molding) >> Fender Garnish >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Take care not to scratch the body surface.
  1. Using a screwdriver or remover, remove the fender garnish (A).
    G13481975Courtesy of KIA MOTORS AMERICA, INC.
  2. To install, reinstall in reverse order of removal procedure.

    Information 

    Replace any damaged clips (or pin-type retainers).