Repair Procedures: Inspection: Thermostat
WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Immerse thermostat in water heated to over 95°C (203°F), then heat for at least 3 minutes to check valve lift.NOTE:
- Do not use water below 95°C (203°F).
- Do not directly heat unit as this will damage thermostat.
- Check the valve opening temperature.
If the valve opening temperature is not as specified, replace the thermostat.
Valve opening temperature:
88 ± 1.5°C (190.4 ± 34.7°F)
Full opening temperature : 100°C (212°F)
- Check the valve lift.
If the valve lift is not as specified, replace the thermostat.
Valve lift : 8 mm (0.3 in.) or more at 115°C (239°F)