LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 347 (Engine Cooling System - 1.6L) >> Thermostat >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Immerse the thermostat in water and gradually heat the water.
    G13480073Courtesy of KIA MOTORS AMERICA, INC.
  2. Check the valve opening temperature.

    Valve opening temperature: 

    82 ± 1.5°C (179.6 ± 2.7°F)

    Full opening temperature:  95°C (203°F)

    If the valve opening temperature is not as specified, replace the thermostat.

  3. Check the valve lift.

Valve lift:  8 mm (0.3 in) or more at 95°C (203°F)

If the valve lift is not as specified, replace the thermostat.