Roof Antenna
WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal.
- Remove the roof trim assembly.
(Refer to Body - "ROOF TRIM ASSEMBLY ")
- Remove the antenna (B) by loosening the mounting nut (A).
Tightening torque:
7.8 - 14.7 N.m (0.8 - 1.5 kgf.m, 5.8 - 10.8 lb.ft)