Repair Procedures: Replacement

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Put on gloves to prevent hand injuries.

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Remove the front door scuff trim.
(Refer to Interior Trim - "DOOR SCUFF TRIM ")
Remove the hood latch release handle.
(Refer to Hood - "HOOD LATCH RELEASE HANDLE ")
Carefully remove the front door body side weatherstrip.
Using a screwdriver or remover, remove the cowl side trim (A).

Courtesy of KIA MOTORS AMERICA, INC.
To install, reinstall in reverse order of removal procedure.
Information

Replace any damaged clips (or pin-type retainers).