LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Head Up Display System) >> Head Up Display Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the side crash pad switch (A) after loosening the mounting screws.
    G13486697Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the side crash pad switch connector (A).
    G13486698Courtesy of KIA MOTORS AMERICA, INC.