SAS Calibration: Notes

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Steering-angle sensor detects the steering angle and steering angle speed. Steering angle and steering angle speed are used for steering wheel damping and return controls in addition to providing assistance torque.

NOTE:

You can use a scan tool to (diagnostic tool) check if the battery voltage is proper before performing the "SAS Calibration".
Make sure that no connector engaged to the vehicle or scan tool is disconnected during the "SAS Calibration".
Once the "SAS Calibration" is complete, turn off the ignition and wait for 10 seconds or more before starting the engine to check the operation.