Repair Procedures: Removal
WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Remove the engine cover.
- Disconnect the ignition coil connector (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
NOTE:
- When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Remove the ignition coil (A) after loosening the mounting bolts.
Tightening torque
:
9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 Ib-ft)
 Courtesy of KIA MOTORS AMERICA, INC.
|