LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Brake System) >> Brake Switch >> Description & Operation >> Operation Principle Of Inductive Non-Contact Switch

Operation Principle Of Inductive Non-Contact Switch

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the high frequency magnetic field and the induced current that are generated by oscillation (to approved voltage) of coil in switch.
  2. The eddy current (electrical loops of current) is generated on the surface of metal by self inductance effect if there is metal in high frequency magnetic field.
  3. The eddy current that is generated attenuates the high frequency magnetic field as much as amount of generated by disturbing the switch's magnetic flux.
  4. ON-OFF by judging whether high voltage magnetic field attenuates or not (calculate the voltage difference by length between metal and coil)
scientia non olet · About LEMON Manuals