LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Motor Driven Power Steering System) >> MDPS Column & Housing >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. Conduct the "SAS Calibration" by diagnostic tool.

    (Refer to MDPS Motor - "DIAGNOSIS WITH DIAGNOSTIC TOOL ")

  3. Conduct the "EPS Type Recognition" by Diagnostic tool.

    (Refer to MDPS Motor - "DIAGNOSIS WITH DIAGNOSTIC TOOL ")

  4. Check the DTC.
    NOTE: If continue a trouble, replace the MDPS control unit.
  5. Turn off the ignition and wait for 20 seconds or more. Then check the operation after starting the engine.
scientia non olet · About LEMON Manuals