LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Seat Electrical) >> Lumber Support Units >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar support assembly.
  2. Install the seat back cover.
  3. Install the front seat assembly.
    CAUTION:
    • Make sure that the connectors are plugged in properly.
    • Check the rear lumbar support system.
scientia non olet · About LEMON Manuals