LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Seat Electrical) >> Lumber Support Units >> Repair Procedures >> Inspection >> Lumbar Support Motor

Lumbar Support Motor

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connectors for each motor.

    [Lumbar Support Motor] 

    G12605644Courtesy of HYUNDAI MOTOR AMERICA
  2. With the battery connected directly to the motor terminals, check if the motors run smoothly.
  3. Reverse the connections and check that the motor turns in reverse.
  4. If there is an abnormality, replace the motors.
    G12605645Courtesy of HYUNDAI MOTOR AMERICA