Specification (VDC)
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
BRAKE SYSTEM SPECIFICATIONS (VDC)
| Part | Item | Standard value | Remark |
|---|---|---|---|
| HECU | System | 4 Channel 4 Sensor (Solenoid) | Total control(ABS, TCS, EBD) |
| Type | Motor, valve relay integrated type | ECU, TCU and CAN | |
| Operating Voltage | 8V - 16V | ||
| Operating Temperature | -40 - 110°C (-40 - 230°C) | ||
| Motor power | Base: 280W/High plus: 535W | ||
| Active Wheel speed sensor (ABS) | Supply voltage | DC 5 - 16V | |
| Output current low | 5.9 - 8.4 mA | Typ. 7 mA | |
| Output current high | 11.8 - 16.8 mA | Typ. 14mA | |
| Output range | 0 - 2500 Hz | ||
| Tone wheel | Front: 46 teeth, Rear: 46 teeth | ||
| Air gap | 0.4 - 1.0 mm | ||
| Steering Wheel Angle Sensor | Operating Voltage | 8 - 16V | |
| Current Consumption | Max. 150 mA | ||
| Output measurement range | -780 to +779.9 ° | ||
| Operating Angular velocity | 0 - 1016 °/sec |