LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Rear Door Assembly) >> Rear Door Black Molding Tape >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to protect your hands.

Information 

  1. Remove the rear door window glass run.

    (Refer to Rear Door - "REAR DOOR WINDOW GLASS RUN ")

  2. Remove the rear door black molding tape (A).
    G13481973Courtesy of KIA MOTORS AMERICA, INC.
  3. To install, reinstall in reverse order of removal procedure.