LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Rear Door Assembly) >> Rear Door Belt Inside Weatherstrip >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim.

    (Refer to Rear Door - "REAR DOOR TRIM ")

  2. Remove the rear door belt inside weatherstrip (A).
    G13481969Courtesy of KIA MOTORS AMERICA, INC.
  3. To install, reinstall in reverse order of removal procedure.

    Information 

    • Replace any damaged clips.
    • When installing, install it by first contacting the inside part (base point of assembly) of arrow to door frame.