Measure The Resistance Of Pressure Sensor
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Disconnect the pressure sensor connector.
- Measure resistance between sensor terminal and terminal.
- Check the measured resistance. (Refer to table)
[Table 1]
| Terminal |
Resistance |
| PIN 2 - PIN 3 |
2.755 - 4.133 kΩ |
| PIN 1 - PIN 3 |
1.892 - 2.838 kΩ |
| PIN 1 - PIN 2 |
1.714 - 2.838 kΩ |