LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Coupling Assembly) >> Direct Electro Hydraulic Actuator Coupling >> Description And Operation >> Description >> Four Wheel Drive (4WD) Transfer Mode Selection

Four Wheel Drive (4WD) Transfer Mode Selection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. AUTO MODE:
    • When driving in 4WD AUTO mode, the vehicle operates similar to conventional 2WD vehicles under normal operating conditions. However, if the system determines that there is a need for the 4WD mode, the engine's driving power is distributed to all four wheels automatically without driver intervention.
    • When driving on normal roads and pavement, the vehicle moves similar to conventional 2WD vehicles.
  2. LOCK MODE:
    • This mode is used for climbing or descending sharp grades, off-road driving, driving on sandy and muddy roads, etc., to maximize traction.
    • This mode automatically begins to deactivate at speeds above 30km/h (19mph) and is shifted to 4WD AUTO mode at speed above 40km/h (25mph). If the vehicle speed decelerates to below 30km/h (19mph), however, the transfer mode is shifted into 4WD LOCK mode again.
scientia non olet · About LEMON Manuals