LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Anti-Lock Brake System (Abs)) >> Troubleshooting >> Even After The Engine Is Started, The ABS Warning Lamp Remains On >> Inspection Procedures >> Check DTC Output

Check DTC Output

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the GDS to the 16P data link connector located behind the driver's side kick panel.
  2. Check the DTC output using GDS.
  3. Is DTC output?

    YES 

    • Perform the DTC troubleshooting procedure (Refer to DTC troubleshooting). See DTC INDEX .

    NO 

    • Check the CAN circuit resistance for ABS warning lamp.
scientia non olet · About LEMON Manuals