LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Anti-Lock Brake System (Abs)) >> Troubleshooting >> Communication With GDS Is Not Possible (Communication With Any System Is Not Possible) >> Inspection Procedures

Inspection Procedures

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Check The Power Supply Circuit For The Diagnosis 

  1. Measure the voltage between terminal 16 of the data link connector and body ground.

    Specification:  approximately B+

    G12602761Courtesy of HYUNDAI MOTOR AMERICA
  2. Is voltage within specification?

    YES 

    • Check the ground circuit for the diagnosis.

    NO 

    • Repair an open in the wire. Check and replace fuse from the engine compartment junction block.