LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Anti-Lock Brake System (Abs)) >> Troubleshooting >> Communication With GDS Is Not Possible (Communication With ABS Only Is Not Possible) >> Inspection Procedures >> Check For Continuity In The CAN Line

Check For Continuity In The CAN Line

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connector from the ABS control module.
  2. Check for continuity between terminals 26, 14 of the ABS control module connector and 3, 11 of the data link connector.
  3. Is there continuity?

    YES 

    • Check the power source of ABS control module.

    NO 

    • Repair an open in the wire.
scientia non olet · About LEMON Manuals