LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Blower System) >> Blower Resistor (Manual) >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Disconnect the connector (A) and then remove the blower resistor (B) after loosening the mounting screws.
    G12606334Courtesy of HYUNDAI MOTOR AMERICA
  3. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals