LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Blower System) >> Blower Resistor (Manual) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the resistance between the terminals.
  2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)
    G12606333Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals