LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Lighting System) >> Back-Up Lamps >> Repair Procedures >> Removal >> RHD

Repair Procedures: Removal: RHD

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper.

    (Refer to Body - "REAR BUMPER ")

  3. Loosen the screw and then remove the back up lamp assembly. [Left side only]
    G12607344Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the back up lamp bulb. [Left side only]
    G12607345Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals