LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Timing System - 2.0L) >> Front Oil Seal >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT DAMPER PULLEY ")

  2. Remove the front oil seal (A).
    G12606423Courtesy of HYUNDAI MOTOR AMERICA
  3. Apply engine oil on the edge of new oil seal.
    NOTE:
    • Remove any debris from the lip portion of the oil seal.
  4. Using the SST (09231-2E000), install a front oil seal (A).
    G12606424Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Do not reuse the front oil seal.
  5. Install the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT DAMPER PULLEY ")

scientia non olet · About LEMON Manuals