Repair Procedures: Installation
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Install the Drive Belt.
- Install the drive belt (B) and then install the drive belt tensioner (A).
Tightening Torque
Center Bolt:
29.4 - 41.2 N.m (3.0 - 4.2 kgf.m, 21.7 - 30.4 lb-ft)
Fixing Bolt:
39.2 - 49.0 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb-ft)
- Using the wrench, turning the drive belt tensioner (A) counterclockwise.
- Connect the drive belt (A).
- Remove the wrench.
- Install the drive belt (B) and then install the drive belt tensioner (A).