LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Crash Pad) >> Crash Pad Garnish >> Repair Procedures >> Removal And Installation >> Crash Pad Garnish [LH]

Crash Pad Garnish [LH]

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to prevent hand injuries.

Information 

  1. Using a screwdriver or remover, remove the crash pad garnish [LH] (A).
    G13486244Courtesy of KIA MOTORS AMERICA, INC.
  2. To install, reinstall in reverse order of removal procedure.

    Information 

    Replace any damaged clips (or pin-type retainers).