LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Rear Seat Assembly) >> Rear Seat Assembly >> Repair Procedures >> Replacement >> Rear Seat Cushion Assembly

Rear Seat Cushion Assembly

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the luggage covering board (A).
    G12605343Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the luggage floor center tray assembly (A).
    G12605344Courtesy of HYUNDAI MOTOR AMERICA
  3. Pull up the rear seat back assembly (A) by pulling the stand-up lever.
    G12605345Courtesy of HYUNDAI MOTOR AMERICA
  4. After loosening the mounting bolts, remove the rear seat cushion assembly (A).

    Tightening Torque: 

    21.6 - 31.4 N.m (2.2 - 3.2 kgf.m, 15.9 - 23.1 lb-ft)

    G12605346Courtesy of HYUNDAI MOTOR AMERICA
    G12605347Courtesy of HYUNDAI MOTOR AMERICA
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals