Connector [B]
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Pin NO | Function | Pin NO | Function |
|---|---|---|---|
| 1 | Battery (+) | 21 | IGN2 |
| 2 | ISG B+ | 22 | IGN1 |
| 3 | ILL+ (TAIL) | 23 | PAB IGN1 |
| 4 | Sensor REF (+5V) | 24 | PAB cut off signal |
| 5 | - | 25 | PAB on signal |
| 6 | - | 26 | - |
| 7 | Intake actuator feedback | 27 | MAX Blower ON Signal |
| 8 | EVAP Sensor (+) | 28 | PTC Relay 3 |
| 9 | AMB Sensor (+) | 29 | PTC Relay 2 |
| 10 | SBR Passenger | 30 | PTC on signal |
| 11 | SBR 2 Row Left | 31 | Detent OUT (-) |
| 12 | SBR 2 Row Middle | 32 | - |
| 13 | SBR 2 Row Right | 33 | P_CAN High |
| 14 | Intake actuator (Fresh Air) | 34 | P_CAN Low |
| 15 | Intake actuator (Recirculated Air) | 35 | - |
| 16 | HTD (Rear defog indicator) | 36 | ECV + |
| 17 | Rear defog switch | 37 | ECV- (Ground) |
| 18 | - | 38 | Sensor ground |
| 19 | Blower ON signal to common | 39 | Ground |
| 20 | ILL- (RHEO) | 40 | Ground |