LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Fuel Delivery System - 1.6L) >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    G12596802Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation nuts (A) and then remove the accelerator pedal module.
    G12596803Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals