LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (General Information) >> General Service Information >> General Information >> Protection of the Vehicle >> Checking Cables and Wires

Checking Cables and Wires

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the terminal for tightness.
  2. Check terminals and wires for corrosion from battery electrolyte, etc.
  3. Check terminals and wires for open circuits.
  4. Check wire insulation and coating for damage, cracks and degrading.
  5. Check whether the conductive parts of terminals contact other metallic parts (vehicle body and other parts).
  6. Check whether there is complete continuity between the attaching bolt(s) of the grounded parts and the vehicle's body.
  7. Check for incorrect wiring.
  8. Check the wiring is clamped to prevent contact with sharp corners of the vehicle body, or hot parts (exhaust manifold, pipe, etc.)
  9. Check that the wiring is clamped firmly to provide enough clearance from the fan pulley, fan belt and other rotating or moving parts.
  10. Check that the wiring has a little space so that it can vibrate between the fixed (the vehicle body) and moving parts (wirings, engine, etc.)
    G12592981Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals