LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Control/Fuel System - General Information - 1.6L) >> Troubleshooting >> Basic Troubleshooting >> Basic Inspection Procedure >> Measuring Condition of Electronic Parts" Resistance

Measuring Condition of Electronic Parts" Resistance

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

The measured resistance at high temperature after vehicle running may be high or low. So all resistance must be measured at ambient temperature (20°C, 68°F), unless stated otherwise.

NOTE:
  • The measured resistance in except for ambient temperature (20°C, 68°F) is reference value.