LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Control/Fuel System - General Information - 1.6L) >> Specifications >> Tightening Torques >> Engine Control System

Engine Control System

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE CONTROL SYSTEM TIGHTENING TORQUE SPECIFICATIONS

Item kgf.m N.m lb-ft
ECM installation nut 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
ECM bracket installation bolt/nut 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
Manifold absolute pressure sensor installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
Intake air temperature sensor installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
Boost pressure sensor installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
Crankshaft position sensor installation bolt 0.8 - 1.2 7.8 - 11.8 5.8 - 8.7
Camshaft position sensor (Bank 1/Intake) installation bolt 0.8 - 1.2 7.8 - 11.8 5.8 - 8.7
Camshaft position sensor (Bank 1/Exhaust) installation bolt 0.8 - 1.2 7.8 - 11.8 5.8 - 8.7
Knock sensor installation bolt 1.9 - 2.5 18.6 - 24.5 13.7 - 18.1
Heated oxygen sensor (Bank 1/sensor 1) installation 4.0 - 5.0 39.2 - 49.1 28.9 - 36.2
Heated oxygen sensor (Bank 1/sensor 2) installation 4.0 - 5.0 39.2 - 49.1 28.9 - 36.2
Rail pressure sensor installation 3.0 - 3.6 29.4 - 35.3 21.7 - 26.3
Electronic throttle body installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
Purge control solenoid valve bracket installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
CVVT oil control valve (Bank 1/Intake) installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
CVVT oil control valve (Bank 1/Exhaust) installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7
Ignition coil installation bolt 1.0 - 1.2 9.8 - 11.8 7.2 - 8.7