DTC Information & Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring the sensor	Faulty Rear Left TPMS sensor
Enable Conditions	The sensors battery is normal
Threshold value	Condition for Detection More than 3 consecutively burst reception of a single frame from WE sensor (i) with pressure, temperature or acc set to 00-h Confirmation phase for DTC Time of 180 seconds must be counted. After the 180 seconds time expires, Set the DTC. If the condition for Detection becomes false during confirmation phase, whole process is cancelled and restart from beginning when the condition is true.
Diagnostic Time	180 seconds
Lamp	Lamp on (60 seconds flashing and ON)