LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Smart Key Unit Diagnosis) >> DTC B1602-00: CAN Error >> DTC Information And Inspection >> Monitor DTC Status >> DTC Status

DTC Status

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug GDS to Data Link Connector (DLC).
  2. Check for DTCs related to CAN communication between the Smart Key Unit (PIC IMMO Unit) and other units (module).
  3. If there is any DTC related to the unit (module), repair it first.
  4. Inspect and repair it and clear the DTC.
  5. Did the same DTC return?

    YES 

    • Thoroughly check CAN connectors of each module for improper mating, pin misplacement, loose pin terminal, or poor connection. Repair or replace the relevant component(s) as necessary
    • Go to "VERIFICATION OF VEHICLE REPAIR 

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals