Wire Harness Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | Probe(+) | Probe(-) |
|---|---|---|---|---|
| Signal circuit (open, short): voltage | Approx. 12V | ECM (PCM) connector: Disconnected Ignition switch: ON |
ECM (PCM)'s signal terminal | Chassis ground |
- Is the result within specifications?
YES
- Go to next procedure.
NO
- Inspect the signal circuit for an open or short. Repair relevant component(s) as necessary and then go to "VERIFICATION OF VEHICLE REPAIR ".