Power Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | (+) Probe | (-) Probe |
|---|---|---|---|---|
| Power circuit: voltage | Battery voltage | 1. Ignition switch: ON 2. PODS-G ECU connector: Disconnected |
PODS-G ECU's power terminal | Chassis ground |
- Is the result within specifications?
YES
- Go to next procedure.
NO
- Check wire harness between the battery and PODS-G ECU for looseness, poor contact, bending, corrosion, contamination, deterioration, or damage. If there is a fault, repair or replace relevant component (s). Then, go to "VERIFICATION OF VEHICLE REPAIR ".