DTC Information Check
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Clear the stored DTCs using a GDS.
- Turn the LKAS off and back on.
- Conduct diagnosis using the GDS and see if there is any DTC.
- Did the same DTC return?
- Is the DTC present?
"PRESENT"
- Replace the LKAS (BLIND-SPOT COLLISION WARNING (BCW) SYSTEM ) with an usable one. Then go to "VERIFICATION OF VEHICLE REPAIR ".
- In case of replacing the LKAS, Calibrate the Camera.
"HISTORY"
- The LKAS memory was not cleared after repair. Clear the DTC and go to "VERIFICATION OF VEHICLE REPAIR ".