LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Integrated Gateway Power Module Diagnosis) >> DTC B2801-00: MM CAN Single Line Error >> DTC Information And Inspection >> DTC Setting Condition

DTC Setting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Trouble Shooting Condition Possible Cause
Main Action
  • Check CAN communication
  1. Open/Poor Connection in M-CAN High line
  2. Open/Poor Connection in M-CAN Low line
  3. Short both M-CAN High line and Low line coincidentally
Prerequisite Condition
  • Power Voltage: Between 9V and 16V
  • M-CAN communication is operating
Threshold Value Case1
  • M-CAN "High" line error
Case2
  • M-CAN "Low" line error
Diagnosis Time
  • 2sec
scientia non olet · About LEMON Manuals