Power Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | (+) Probe | ↔ | (-) Probe |
|---|---|---|---|---|---|
| Power Circuit Short: Resistance | Infinity (∞) | 1. Ignition Switch: OFF 2. BATTERY (-) terminal. SJB*, Internal Tail Lamp* connector: Disconnect |
Internal Tail Lamp*_Power | ↔ | Chassis Ground |
- Is the resistance within specification?
YES
- Check for an intermittent Short-to-Ground caused by bending, corrosion, contamination, deterioration of the harness/connector.
NO
- Disconnect the component connector of Internal Tail Lamp* Circuit one by one.
→ If the normal value is measured when disconnect the connector, check for Short between the power terminal of the component and SJB*.
NOTE: SJB*: "IGPM_IPS6 (2CH)"
Internal Tail Lamp*: "Illuminations"