LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Integrated Gateway Power Module Diagnosis) >> DTC B1699-00: CAN Time-Out AV/AVN >> Wiring Inspection >> CAN Communication Circuit Inspection

CAN Communication Circuit Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item Normal Value Prerequisite Condition (+) Probe ↔ (-) Probe
M-CAN High Open: Resistance Below approx. 1Ω 1. Ignition switch: OFF
2. CGW*, Av/AVN* connector: Disconnect
CGW*_M-CAN High" ↔ AV/AVN*_M-CAN High"
M-CAN Low Open: Resistance CGW*_M-CAN Low" ↔ AV/AVN*_M-CAN Low"
  1. Is the resistance within specification?

    YES 

    • Check for an intermittent Open/Poor Contact caused by bending, corrosion, contamination, deterioration of the harness/connector.

    NO 

    • Repair Open/Poor Connection in the abnormal terminal/harness.
    NOTE: CGW*: "IGPM_GATEWAY"
    AV/AVN*: "A/V & NAVIGATION HEAD UNIT"