Power Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | (+) Probe | ↔ | (-) Probe |
|---|---|---|---|---|---|
| Power Circuit Open/Short: Voltage | Battery Voltage | 1. Ignition switch: ON 2. BCM* connector: Disconnect |
BCM*_"ON/START input" | ↔ | Chassis Ground |
- Is the voltage within the specification?
YES
- Check for an intermittent Open/Poor Contact caused by bending, corrosion, contamination, deterioration of the harness/connector.
NO
- Repair Open/Poor Connection in the terminal/harness.
- Repair Short between the terminal/harness and Chassis Ground.
NOTE: BCM*: "BCM"