LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Head Up Display Diagnosis) >> DTC B1603-00: CAN BUS Off >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Erase the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Did the same DTC return?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • The system is running properly in line with the specifications at this time.
scientia non olet · About LEMON Manuals