DTC Setting Condition
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Troubleshooting |
Condition |
Possible Cause |
| Main action |
- Monitor the sensor alignment value
|
- Sensor Alignment Error
- FAC module installation (Horizontally or Vertically) Error (Check for bracket, vehicle deformation)
|
| Prerequisite condition |
- Battery Voltage is between 9V and 16V.
- Ignition has been on for over 2 sec.
|
| Threshold Value |
- Reflector alignment is not initialized.
- Reflector alignment ended not properly.
- Horizontal angle error after reflector alignment.
- Vertical angle error after reflector alignment.
- Horizontal/vertical angle error while driving.
|
| Diagnosis Time |
|
| MIL |
- FCA operation cancelled/inhibited
- FCA warning lamp ON
|