LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine Control System Diagnosis - 2.0L (3 Of 3)) >> DTC P2414-00: O2 Sensor Exhaust Sample Error (Bank 1 / Sensor 1) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item  Detecting Condition  Possible Cause 
Main Action
  • Plausibility check: whether sensor is mechanically well-mounted or not
  1. Poor connection or harness damage
  2. Front HO2S
Prerequisite Condition
  • Engine is partial load condition (higher than 0.01% of accelerator pedal value), full load (over 90%) or at idle (under 0.01%).
  • Upstream O2 sensor operative readiness is detected.
  • Battery voltage is between 11V and 16V.
Threshold Value
  • Upstream O2 sensor current is higher than 3.6mA.
Diagnostic Time
  • 10 Seconds
MIL-On Condition
  • 3rd Driving Cycle
scientia non olet · About LEMON Manuals