Inspect The Leakage In EVAP. System For The Following Conditions
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the manifold side vacuum hose from the EVAP canister purge valve.
- Using a hand vacuum pump apply specified vacuum (Approx. 15 in, Hg) to the manifold side of the valve.
- Does the valve hold vacuum?
YES
- Go to next step below.
NO
- Repair or replace as necessary. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.