Check Intake/Exhaust System For Leakage

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Visually/physically inspect the air leakage in intake/exhaust system for the following areas:
- Vacuum hoses for splits, kinks and improper connections.
- Throttle body gasket
- Gasket between intake manifold and cylinder head
- Seals between intake manifold and fuel injectors
- Exhaust system between HO2S and three way catalyst for air leakage
Inspect the leakage in EVAP. system for the following conditions:
CAUTION: Check the EVAP canister for fuel saturation. If the EVAP canister is full of fuel, visually and physically inspect the EVAP and fuel system.
Was a problem found in any of the above areas?
YES
- Repair or replace as necessary. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to next step below.